Eizo RadiForce RX370 3MP 21" Color LED General Radiology Diagnostic PACS Display (RX370)

Quickly maximize your monitor’s brightness to make detailed medical images easier to see with the Instant Backlight Booster. This function uses a single hotkey to adjust the brightness of a single monitor or a group of monitors at once.

DICOM Part 14 is not supported while the Instant Backlight Booster is on.

Use a single mouse and keyboard to simultaneously operate two different workstations with the Switch-and-Go function. When working across multiple displays, simply move your cursor from one screen to the other or switch between workstations without the tedium of changing the mouse and keyboard each time, therefore increasing efficiency by reducing the number of monitors in your workflow.
DICOM Part 14 is not supported while the Instant Backlight Booster is on.

Radiologists know the eye strain caused by viewing a bright monitor in a dark environment for long periods, so RadiLight provides a solution. Attach the optional RadiLight light directly to the back of an Eizo RadiForce RX370 monitor to illuminate the wall behind it without taking up any additional desk space, ensuring there are no reflections on the screen that could interrupt reading.

Optimize every pixel in your display with the Hybrid Gamma PXL function, which creates a hybrid display by automatically distinguishing between monochrome and color images pixel by pixel. The result is that monochrome images are displayed in DICOM Part 1 compliant greyscale, while color images are effectively reproduced corresponding to Gamma 2.2. This improves the efficiency of viewing both monochrome and color images together on one screen, allowing Radiologists to read CR and DR alongside color endoscopy, nuclear medicine, 3D rendering, and fusion without worrying about diminished image quality.

To meet the performance standards of a medical monitor, a display must be capable of high brightness. However, the crux of LCD monitors is the increased pixel aperture necessary to achieve a high luminosity, which inevitably leads to a decline in sharpness over time. But with Eizo’s unique Sharpness Recovery technology, the frustrating decrease in sharpness (MTF) can be restored, allowing you to safely and effectively display images true to the source data, even at high brightness levels.
MTF measures numerically how faithfully the panel transfers details from the original image data for viewing. When Sharpness Recovery is turned on, in the case of a 2-pixel line pair (spatial frequency of 1.182 cycles/mm) the MTF increases by approximately over 50%.

To ensure every monitor is compliant with DICOM Part 14, Eizo carefully measures and sets the greyscale at the factory. Upon startup or wakeup, images are ready to be faithfully reproduced with stable brightness and greyscale thanks to the Eizo patented drift correction function. This technology quickly stabilizes the brightness level and compensates for fluctuations caused by the ambient temperature and the passage of time.

Drive several monitors in a daisy chain sequence by using the DisplayPort connection, allowing you to configure a hassle-free multi-monitor setup without excessive cabling. A graphics board that supports the daisy chain is necessary.

Focus on the images you’re reading, not the screen’s bezels with the RX370’s black bezel design, ideal for dark reading rooms. Plus, the unique white stripe around the sides and curves on the back of the monitor creates a clean, elegant aesthetic.
DICOM Part 14 is not supported while the Instant Backlight Booster is on.

Easily connect a mouse, keyboard, or other USB devices with two USB Type-A downstream ports built into the monitor. An additional USB Type-C port with up to 15-watt power supply is excellent for charging smartphones and tablets and does not allow the computer access to your device’s memory or settings, maintaining security while connected.

Inevitably, an LCD monitor’s brightness and color gradually shift over time with repeated use, making it difficult to detect. Implementing a quality control solution is crucial to ensuring your monitor’s display stays consistent. With the Integrated Front Sensor (IFS) built into the front bezel of the RadiForce monitor and RadiCS LE software (included), you can easily calibrate to DICOM Part 14 without having to mount, run, and remove an external sensor.

Simple calibration using the monitor backlight sensor is also supported.

Radiologists view more and more information on their screens as image modalities become digitalized, so Eizo’s Work-and-Flow functions are great for simplifying the imaging workflow, operating in tandem with RadiForce monitors and RadiCS LE software.